Centrolock MIS Bunion Correction
Centrolock MIS Bunion Correction
Power of a Lapidus without the Fusion for MIS Bunionectomy Procedures
The Centrolock MIS Bunion Correction transforms standard fixation and treatment methods for correcting hallux valgus, specifically in minimally invasive bunionectomy procedures, by integrating a cannulated intramedullary stem with plate fixation at the metatarsal head.
- Overview
- Documents
The Centrolock MIS Bunion Correction design is a transformative solution that combines a cannulated intramedullary stem with plate fixation on the metatarsal head, providing robust three-plane corrections.
Procedures once limited to Lapidus can now be performed with distal minimally invasive guided approach, transforming MIS bunionectomy surgeries
Minimally Invasive Technique, Reproducible Outcomes
1
Transverse osteotomy
Guided multiplane correction.
2
Implant positioning
Intermetatarsal angle correction & sagittal plane correction.
3
Distal fixation
Inferior locking screws, implanted to achieve sagittal plane correction.
4
Rotational alignment
Frontal plane alignment and compression.
5
Proximal fixation
Proximal fixation, securing final correction.
Guided Instrumentation for Minimally Invasive Surgery
| Part# | Description | QTY | |
|---|---|---|---|
| 1 | XMS01026 | Centrolock targeting / compressing guide | 1 |
| 2 | XRE01022 | Centrolock Countersink | 1 |
| 3 | XDB01019D | Centrolock drill bit Ø1.5mm* | 2 |
| 4 | XSD01003 | Centrolock screwdriver tip T7 | 2 |
| 5 | XDG01018 | Centrolock drill guide – screw Ø2mm | 2 |
| 6 | XGA01011 | Centrolock depth gauge | 1 |
| 7 | XDB01020D | Centrolock drill bit Ø1.8mm* | 2 |
| 8 | XGA01003 | Screw measurer | 1 |
| 9 | XDG01019 | Centrolock locking drill guide – screw Ø2.5mm | 2 |
| 10 | XHA01002 | AO Ratcheting Handle | 1 |
| 11 | XMS01030 | Centrolock impactor | 1 |
| 12 | XT106010 | Centrolock® Stemless trial sizer Left | 1 |
| 13 | XT106010 | Centrolock® Stemless trial sizer Right | 1 |
| 14 | XRE01014 | Centrolock cannulated reamer | 1 |
| 15 | XMS01009 | Percutaneous rasps | Optional |
| 16 | XMS01029 | Centrolock elevator | 1 |
| 17 | CKW01013 | K-wire Ø2 lg. 150 TR-RD extra sharp* | 4 |
| 18 | XPP01005D | Centrolock temporary fixation pin* | 2 |
| 19 | CKW01012 | K-wire Ø2 lg. 100 TR-RD extra sharp* | 4 |
| 20 | XMS01033 | Retractor | 2 |
| ACC1001P0020 | Centrolock K-wires holder | 1 | |
| XMS01040-1 XMS01040-2 |
Centrolock cutting template Right Centrolock cutting template Left |
1 1 |
|
| XTI06012 | Centrolock trial implant – Left step 2mm | 1 | |
| XTI06014 | Centrolock trial implant – Left step 4mm | 1 | |
| XTI06016 | Centrolock trial implant – Left step 6mm | 1 | |
| XTI06022 | Centrolock trial implant – Right step 2mm | 1 | |
| XTI06024 | Centrolock trial implant – Right step 4mm | 1 | |
| XTI06026 | Centrolock trial implant – Right step 6mm | 1 | |
| XHA01001 | AO handle | 1 | |
| XMS01036 | Centrolock straight impactor | Optional |
